January 18, 2022
It can be a challenge for a grower to get sufficient PAR light insights that are collected with the 30MHz sensors. So I have created a dashboard model where the PAR Light data in combination with other sensor values are visualized. Three tips for carefully measuring PAR light data and a manual for setting up a PAR dashboard on the 30MHz platform:
Tip 1: Visualize your light averages per day and week in mol/m2/seconds
My goal is to achieve a high growth speed with the right quality for my customers. Important metrics are light in micromole and averages per day and week in mol/m2/seconds to achieve this. I think the following layout is most suitable to get these PAR Light insights:
Tip 2: Flatten your peaks and you can work with a higher PAR sum
As a consultant, I aim to create optimal conditions for the crop and avoid high peaks. With too many peaks in these conditions, the leaves of your crop will turn yellow and you will need to screen to avoid this. If you can’t control your peaks, you will probably lower your total PAR sum to keep the colors of the leaves in the right condition.
If you can flatten your peaks, you can work with a higher PAR sum. This will result in a better crop quality and a higher growth speed.
Tip 3: It is important to have a weekly dashboard that visualizes the data per day
An important component is the combination of PAR sum per day with the 24h average temperature. If you can reach a higher PAR sum, you can realize a higher 24h average temperature without any stretching. That is why it is so important to control this every day within the dashboard. Notifications in the dashboard can help you to realize this goal.
As a day never can be the same, it is important to have a weekly dashboard that visualizes the data per day. This can be visualized in the dashboard with a bar chart. If the weather is changing and e.g. the light intensity is decreasing, you can decide to change your screening strategy.
Of course you will need to have the following sensors at your greenhouse to be able to create the PAR dashboard:
This rugged sun calibration quantum sensor was designed to measure the strength of natural sunlight. Use the PAR to measure PPFD (Photosynthetic Photon Flux Density) in agricultural environments including greenhouses, growth chambers, or outdoor plant canopy environments.
Pointed Micro Climate Sensor
This sensor uses leaf temperature and temperature humidity measurements to continuously capture microclimate at close range. Use data from the sensor to better determine heating needs, cutting unnecessary energy expenditures and lowering the risk of plant fungus and disease. A lot of our customers use this sensor for measuring VPD and dew point.
30MHz Sensor Catalogus
Designed for accuracy, flawless connectivity and remote placement, these tools are built to withstand the elements in all growing contexts. Build your digital infrastructure with a combination of sensors that suit your needs, and add new data sources at any time.
Download de 30MHz Sensor Catalogus
Create a PAR dashboard?
Do you want to create the PAR dashboard that I have shown above? On our support page you will find a step-by-step guide on how to build this dashboard.
Follow the step-by-step guide >>